Neutrality across the full sound spectrum
Excellent dynamics for a very low distortion
8” (21cm) Slatefiber cone woofer
Large laminar vent
Identical tonal balance at both low and high volume
Connect up to 3 audio sources
Inserts for wall and ceiling fastening
Automatic disengageable stand-by
Protection grilles included
Eigenschaften
Ausgezeichnete Dynamik
Breites Abstrahlverhalten, so dass im gesamten Raum derselbe Klang erreicht wird
Schieferfaser-Membran aus französischer Fertigung sorgen für Klangneutralität und keine Verzerrungen
Identische Klangbalance bei niedriger und hoher Lautstärke
Anschluss von bis zu 3 Audioquellen
Inklusive Schutzgitter für die Chassis
Alpha 50, the most compact of the line, is equipped with a 1" (25mm) tweeter and a 5" (13cm) woofer. It features a 20W amplifier for the tweeter anda 35W amplifier for the woofer, and has a frequency response of 45Hz to 22kHz (+/- 3dB). It is perfectly adapted for confined spaces.
Key points
Low directivity: keeps the same sound throughout the room
Damping and rigidity: neutrality, no distortion
Tonal balance is identical at low and high volumes; low sensitivity to the wall effects
Connect up to 2 audio sources
Optimal acoustic integration
Reduced power consumption
Alpha 65 is equipped with a 1" (25mm) tweeter and a 61/2" (16.5cm) woofer. It features a 35W amplifier for the tweeter and a 70W amplifier for thewoofer, and has a frequency response of 40Hz to 22kHz (+/- 3dB). This model performs just as well with instrumental music as with electronic music,and is characterised by its great versatility.
Key points
Low directivity: keeps the same sound throughout the room
Damping and rigidity: neutrality, no distortion
Tonal balance is identical at low and high volumes; low sensitivity to the wall effects
Connect up to 2 audio sources
Optimal acoustic integration
Reduced power consumption
Alpha 80, the flagship of the line, is equipped with a 1" (25mm) tweeter and an 8" (21cm) woofer. It features a 40W amplifier for the tweeter and a100W amplifier for the woofer, and has a frequency response of 35Hz to 22kHz (+/- 3dB). This model is particularly ideal for producing music whichis rich in bass or which requires high power reserves.
Key points
Low directivity: keeps the same sound throughout the room
Damping and rigidity: neutrality, no distortion
Tonal balance is identical at low and high volumes; low sensitivity to the wall effects
Connect up to 2 audio sources
Optimal acoustic integration
Reduced power consumption
Two monitors in one!
Essentially, the Trio6 Be is a three-way speaker with a 1” tweeter, a 5” woofer, and an 8” subwoofer. Yet, switching to FOCUS mode reconfigures Trio6 Be in two-way monitor.
The Trio6 Be was designed to meet the standards of the most demanding engineers. This dual monitor is the new reference in its price range owing to its extreme neutrality, its precise stereophonic imaging, and its ability to resolve the most minute sonic details, while its Class G amplifiers deliver SPL levels to suit all musical styles.
THREE-WAY MONITOR
1” tweeter, a 5” woofer, and an 8” subwoofer
Trio6 Be - 3 voiesWhen utilised to its full potential, the Beryllium tweeter reaches up to 40kHz and the 8” subwoofer extends low frequencies down to 35Hz. This offers engineers complete control of the audio signal.
The 8” W composite sandwich cone subwoofer is complemented by its large port integrated into the front baffle, making it easy to position the monitor near the front wall without saturating the ports and maintaining excellent low-frequency linearity. Its large front port guaranties consistent performance regardless of SPL levels. It also allows a positioning closed to a wall without wall boost effect, allowing an easy integration even in small rooms.
The 5” W composite sandwich cone woofer is installed in an isolated chamber within the cabinet that prevents the sympathetic activation of its other speakers while optimising its acoustic performance. Two front-facing ports provide bass reflex, enabling the woofer to perform identically in both two-way (90Hz – 2.5kHz) and three-way (250Hz – 2.5kHz) configurations.
The 1” pure Beryllium inverted dome tweeter provides numerous advantages, including wide dispersion, amazing frequency response linearity, quick dynamics, and unrivaled impulse response.
TWO-WAY MONITOR
1” tweeter, a 5” woofer
Trio6 Be - 2 voiesAs a two-way speaker, Trio6 Be employs only the 5” woofer and the tweeter, limiting frequencies to between 90Hz and 20kHz. This configuration provides the perfect compromise when checking the quality of the mix for playback systems with limited frequency response, such as TVs, PCs, cars, and portable speaker systems. The frequency response curve of the two-way configuration is identical, though less extended, to its three-way curve, allowing for a perfect comparison that preserves the stereo image. Focusing on this critical middle frequency range facilitates a good mix and enables the engineer to ensure that the levels are just right. A footswitch (not included) activates this configuration remotely from the listening position.
A ¼” input jack on the rear panel receives the trigger signal from a remote pedal, while a ¼” output sends a link to the input on a paired monitor. Most singlebutton guitar amplifier footswitches are compatible.
Rotating baffle
Trio6 Be may be used vertically or horizontally to optimise positioning thanks to an adjustable aluminum baffle housing the woofer and tweeter.
This rotating baffle is capable of rotating 360° in 90° increments, making it one of the most versatile speakers to position.
Key points
Two monitors in one with remote switching: a quick and effective way to compare the mix translated to a compromised speaker system
Wide uncompromised dynamics, linearity, and wide dispersion produced by Beryllium inverted dome tweeter: state-of-the-art speaker design and material
Neutral, distortion-free sound thank to W composite sandwich cone
Rotating baffle: facilitates both horizontal and vertical setups
Simplified room integration, thank to LF and HF shelving, 160Hz EQ
High SPL accommodates all musical styles (115dB peak @ 1m)
FOCUS mode (two-way or three-way configuration): Remote pedal (not supplied)
Low and high frequencies & 160Hz notch adjusting: three control knobs
PROFESSIONELLER KOPFHÖRER
OHRUMSCHLIESSEND UND OFFEN
Clear Mg Professional versteht sich als unerlässliches Tool für die anspruchsvollsten Musiker. Dieser Kopfhörer der Spitzenklasse verfolgt ein einziges Ziel: Die ultimative Referenz für sichere Übertragungsqualität der produzierten Musik werden. Seine Breitbandlautsprecher mit „M“ Inverskalotte aus Magnesium bieten ein ultimatives Klangerlebnis. Clear Mg Professional zeichnet sich durch Präzision, Dynamik und Klangbalance aus.
Listen Professional circum-aural closed back headphones are the essential work tool for music production. Their tonal balance and precision in terms of audio spectrum make them perfect to evaluate the sound work quality. In addition, their comfort and accessories will make them very attractive for people travelling on business trips. The sound quality and the dynamics of these headphones are very surprising considering that this quality is usually found on more expensive items. The attention to detail of these headphones can be also shown thanks to the various patents and technologies which belong to Focal. Hence, a brand new driver membrane was developed. The main goal was to propose a solution which would keep all the dynamics from the original track while reproducing accurately every single detail on the whole audio spectrum. Even if Listen Professional headphones are closed, they produce a very lively sound, giving the feeling of semi-open headphones while still providing the isolation of closed headphones.
Shape 40 is the most compact studio monitor in the Focal Professional line, and the perfect solution for nearfield monitoring. These monitors can be used from 23″ away (60cm), and they have astonishingly extended low end frequency response. Whether you have a room of less than 107ft2 (10m2), or an installation where compactness is paramount, Shape 40 is the perfect solution.
The three monitors are all made in France and integrate five innovations to maximise acoustic transparency. Designed to meet the needs of nearfield monitoring, Shape monitors combine an ingenuous design and numerous settings optimised for the acoustics of small listening rooms.
These innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image. The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalisation of these essential registers much easier. Finally, the new tweeter is what’s at the source of the very high definition. It efficiently reveals any hissing, and it’s also very precise in the very high end.
Shape 50 is the versatile monitoring loudspeaker par excellence. This monitor can be used from 30″ away (80cm), and it has very extended low end frequency response (50Hz) considering its compact design. Thanks to this design and to the numerous settings, this monitor is ideal for rooms measuring less than 130ft2 (12m2).The three monitors are all made in France and integrate five innovations to maximise acoustic transparency. Designed to meet the needs of nearfield monitoring, Shape monitors combine an ingenuous design and numerous settings optimised for the acoustics of small listening rooms.These innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image. The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalisation of these essential registers much easier. Finally, the new tweeter is what’s at the source of the very high definition. It efficiently reveals any hissing, and it’s also very precise in the very high end.
Shape 65 is the reference of the Shape line. Although it’s dedicated to nearfield monitoring, this monitor enables extraordinary monitoring quality, in the lowest to the highest frequencies. Simply a must, this monitor will express its full potential from a listening distance of three feet away (1 metre).
The three monitors are all made in France and integrate five innovations to maximise acoustic transparency. Designed to meet the needs of nearfield monitoring, Shape monitors combine an ingenuous design and numerous settings optimised for the acoustics of small listening rooms.These innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image. The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalisation of these essential registers much easier. Finally, the new tweeter is what’s at the source of the very high definition. It efficiently reveals any hissing, and it’s also very precise in the very high end.
KEY FEATURES
Tweeter with very low directivity for a flexible listening position
Designed without a port, but with a double passive radiator, allowing it to be placed near a wall.
Numerous settings for optimal integration
Accurate control, even in the very high end
Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers.
Mounting mechanisms present on the back and underneath the loudspeaker: for installing on a table stand, a microphone stand, the ceiling or a wall (Mounting accessories not supplied).
This standard bearer of the Shape series features two passive radiators, woofers equipped with a new Flax cone, and the latest “M”-shaped Aluminium/Magnesium inverted dome tweeter. Perfect weapon of mass production for professionals.
Shape Twin is made in France, just like Shape 40, 50 and 65. Designed to meet the needs of nearfield monitoring, these monitors combine an ingenuous design and numerous settings optimised for the acoustics of small listening rooms. Shape Twin stands out through its excellent rendering over the whole audio spectrum, its broad frequency response in the low end, and its high SPL considering its size. The compact design makes it easy to integrate even into the most cramped of rooms. Finally, its 2.5-way design gives it a real advantage when it comes to controlling the bass and lower mid-range registers which are the hardest to control in small rooms.
Shape Twin’s five innovations present a remarkable tonal balance, with very wide and precise stereo imaging. The low frequencies are well defined as well as controlled. The low-mid and mid ranges provide a true neutral sound.
FOCAL Solo 6 BE Aktiver 2-Wege Studiomonitor Solo 6Be: Auch der kleinste Spross aus der Studio Monitor Familie von Focal besitzt schon den einzigartigen Focal Beryllium Dome Tweeter, der Frequenzen bis zu 40Khz impulsgetreu und akkurat wiedergibt. Der Tieftöner ist in FOCAL´s patentierter 'W-Cone' Technologie hergestellt und sorgt für eine impulsfeste Basswiedergabe auch bei höchsten Pegeln ohne zu flattern. Der Tweeter wird durch einen 50W BASH Amp und der Woofer durch einen 100W Class AB Amp angetrieben. Frequenzgang 40Hz-40KHz LF&HF Contour Potis, 11kg. Solo 6Be technische Spezifikationen: System o Frequenzgang 40Hz 40khz +/ 2dB o Maximaler Schalldruckpegel 113dBSPL (peak@1m) Interne Sektion Input Sektion o Analoger Eingang Typ/Impedanz elektronisch symmetriert / 10kOhm o Anschluß XLR o Empfindlichkeit einstellbar, 10dBv oder +4dBu Verstärker Sektion o LF Stufe 150 Watt RMS, BASH Technologie o HF Stufe 100 Watt RMS, Class AB Netzteil o Spannungsversorgung: 230V (1,25A Sicherung) oder 115V (2,5A Sicherung) o Anschluss: IEC Buchse, abnehmbares Netzkabel Anschlüsse Bedienung und Anzeigen o Hardware: Schalter für Eingangsempfindlichkeitumschaltung des analogen Einganges o Schalter zum Auswählen für linke Box/rechte Box o LF und HF Contour Potentiometer o Ein/Aus Schalter, Betriebsspannungswahlschalter o Anzeigen Power On LED Bestückung o Bass/Mitten 'W' Cone, Focal 6W4370 6,5´´ Lautsprecher o Hochton: Focal TBE Pro inverted Beryllium Dome Tweeter o Abschirmung: ja, magnetische Abschirmung durch Design des Magneten integriert Gehäuse o Konstruktion 19mm MDF Gehäusewände mit internen Verstrebungen o Finish schiefergrau (Korpus), schwarz (Seiten) o Abmessungen 330mm x 240mm x 290mm o Gewicht 11kg
Das voluminöse Gehäuse des Sub6 ist mit einem 11 Zoll Woofer und einem rückseitigen Reflex-Port bestückt. Diese Konfiguration stellt eine lineare Basswiedergabe sicher - unabhängig vom Schalldruckpegel. Das Kontrollfeld ist extrem vielseitig ausgelegt und bietet über L/R-Ein- und Ausgänge sowie den LFE variable Anschlussmöglichkeiten für den Betrieb in 2.1-, 2.2- und Mehrkanalanwendungen. Durch die zahlreichen Einstellmöglichkeiten wie die für Monitore ausgelegte Hochpass-Frequenzweiche sowie die einstellbaren Parameter für die Phasenlage und die Lautstärke ist eine optimale Anbindung an die Monitore Solo6 Be und Twin6 Be sichergestellt. Und schließlich gibt es da noch ein kleines, aber entscheidendes Merkmal: den Fußschalter-Eingang. Über einen hier angeschlossenen Fußschalter lassen sich der Subwoofer und die Hochpass-Frequenzweichen an den Ausgängen, an denen die Monitore angeschlossen sind, deaktivieren. Dadurch wird die Abhörsteuerung in den verschiedenen Phasen der Monitorings vereinfacht und deutlich verbessert.
Eigenschaften
Individuell einstellbare Tiefpass-Weiche + Lautstärke + Phase; Polaritätsschalter; Fußschaltereingang;
Zwei 8" (20cm) Slatefiber-Membranen, hergestellt in Frankreich. Klangneutralität, präzise Basskontrolle
Große Bassreflexöffnungen an der Frontseite
Subwoofer mit langem Hub und hohem Wirkungsgrad. Optimale Reproduktion von klanglichen Details
LFE-Kanal, Stereo Input, Stereo Output
2.1 Lautsprecher-Managementsystem für die optimale Anbindung an Satellitenlautsprecher
200W RMS-Verstärker
THE LOUDSPEAKER DEDICATED TO NEARFIELD AND MIDFIELD
As well as new speaker drivers (a 5” midrange and a 10” subwoofer) with high efficiency and power handling, the Trio11 Be monitor enjoys all of Focal's very latest technologies when it comes to acoustics and electronics: TMD and NIC technologies; optimised vents that promote dynamic control and perfect bass definition; high excursion, enabling even more linearity of the subwoofer...
Thanks to its class G amplification, Trio11 Be delivers a high SPL (118dB at 1m) and offers a great versatility of use and installation configurations in nearfield AND midfield applications. A key asset, always coming along with an extremely precise sound reproduction and stereo image.
With an extended bandwidth (30 Hz-40 kHz), this loudspeaker is also composed of a 3-way monitor and a 2-way monitor, just like Trio6 Be, which lets you check the mix transfer sound quality thanks to FOCUS mode.
Features:
High SPL: 118 dB @ 393/8'' (1m).
FOCUS Mode: two monitors in one with remote switchover.
Pure Beryllium inverted dome tweeter: very low directivity, linearity, dynamics.
‘W’ composite sandwich cone on woofer and subwoofer: neutral sound, no distortion.
Bass, mid-bass and treble settings on rear panel: optimum acoustical integration.
Optimised decoupling of the midrange speaker driver thanks to silent blocks.
Ultra-low distortion and noise.